Step 1
1. Make sure your firearm is un-loaded and safe to work on.
2. Remove the factory butt pad from butt stock.
FalconStrike Multi-Fit Recoil Pad Install Instructions
Step 2
3. Remove FalconStrike from package.
4. Screw the cam plate to the stock. Center the cam plate before tightening the screws.
Step 3
5. Next, prepare the Multi-Fit pad by rolling the skirt up with your thumbs. Roll up both ends.
6. Next, fold the cams straight out and install the pad onto the cam plate.
Step 4
7. Lock the pad onto the cam plate. Push down hard on the pad and close the cams half way.
8. Test to see that the cams have hooked the pad at both ends.
Step 5
9. Close the cams all the way.
10. And finally, snap the skirt onto the stock.
By following these steps, your FalconStrike will stay firmly in place on a wood or synthetic stock, with no measuring, grinding or hassle.
If you have any questions, please contact us.
